Questions in topic: "complexsamples"
https://developer.ibm.com/answers/questions/topics/single/257655.html
The latest questions for the topic "complexsamples"The YRBS complex sampling method and computing the Cochran-Mantel-Haenszel method of association
https://developer.ibm.com/answers/questions/511241/the-yrbs-complex-sampling-method-and-computing-the.html
To provide clarity I have updated my question. Is there a method to compute the CMH test in complex samples?
Do to the sampling plan and probability does computing the Cochran-Mantel-Haenszel test outside of complex samples give bias results for Youth Risk Behavior Surveillance system data? Or is the probability the same whether or not computation is within complex samples?
Thank youstatisticscomplex data typecomplexsamplesTue, 09 Jul 2019 03:18:26 GMTReseHow is standard error under estimated marginal means calculated in complex samples
https://developer.ibm.com/answers/questions/499427/how-is-standard-error-under-estimated-marginal-mea.html
I have used complex samples GLM and am wondering how SE is calculated under Estimated marginal means. I tried to calculate the square root of the sample size multiplied by this SE to see if the number matches the SD of the sample and the numbers are slightly different. Therefore I am wondering if a different N is used to calculate this SEcomplexsamplesMon, 01 Apr 2019 06:50:27 GMTpat.kSPSS complex samples - Logistic regression setup and poutput interpretation
https://developer.ibm.com/answers/questions/496146/spss-complex-samples-logistic-regression-setup-and.html
I am trying to do a multinomial logistic regression with SPSS complex samples (v.25). Unfortunately, I cannot find much information on what I should be looking at under each button: statistics, Hypothesis tests, etc. in order to run the analysis correctly and be able to interpret the output accurately.
Can anybody point me to resources that help with this? I tried one run, but I am not sure where to look for the overall model significance for example. Is this under the "Tests of model effects" table and labelled as (Corrected model)" ?logisticregressioncomplexsamplesThu, 07 Mar 2019 23:02:31 GMTmamill5Test statistic in logistic regression for continuous predictor and categorical outcome - complex samples
https://developer.ibm.com/answers/questions/491185/test-statistic-in-logistic-regression-for-continuo.html
What is the correct test statistics under Complex samples logistic regression --> Hypothesis Tests --> Test statistics to assess the relationship between a categorical outcome and a continuous predictor?
Is it F, adjusted F, Chi Square, or Adjusted Chi Square?complexsamplesbivariatelogregrMon, 04 Feb 2019 01:13:07 GMTmamill5Bivariate correlation with categorical outcome and continuous predictor - Complex Samples
https://developer.ibm.com/answers/questions/491148/bivariate-correlation-with-categorical-outcome-and.html
I have a set of categorical as well as continuous predictors and my outcome variable is categorical polytomous with 3 categories. So, I want to do bivariate analysis to decide which variables to include in my multivariate logistic analysis. I figured out that I can do bivariate correlation for the categorical predictors using cs crosstabs and looking at the "Test of independence for rows and columns". I am having trouble figuring out the best way to look at correlation for the continuous variables. I thought of doing it with cs logistic regression, but I am not sure what statistics to use, would it be "Correlations of parameters estimates"? Thanks for your help.complexsamplesbivariateSun, 03 Feb 2019 04:31:41 GMTmamill5SOAP array response to JSON Conversion in API Connect
https://developer.ibm.com/answers/questions/483554/soap-array-response-to-json-conversion-in-api-conn.html
Hi Community,
I need to code in API Connect for a scenario where I am invoking a SOAP service and it is giving me response in arrayed format like:
<AddressR>
<Label>Building name</Label>
<Line>Garden City</Line>
</AddressR>
<AddressR>
<Label>Flat/Unit (Type)</Label>
<Line>Apartment</Line>
</AddressR>
<AddressR>
<Label>Flat/Unit (Number)</Label>
<Line>666</Line>
</AddressR>
<AddressR>
<Label>Building level (Type)</Label>
<Line/>
</AddressR>
<AddressR>
<Label>Building level (Number)</Label>
<Line/>
</AddressR>
<AddressR>
<Label>Building number</Label>
<Line>30</Line>
</AddressR>
<AddressR>
<Label>Allotment (Lot)</Label>
<Line/>
</AddressR>
<AddressR>
<Label>Allotment (Number)</Label>
<Line/>
</AddressR>
<AddressR>
<Label>Street (Name)</Label>
<Line>Strt</Line>
</AddressR>
<AddressR>
<Label>Street (Type)</Label>
<Line>St</Line>
</AddressR>
I need to map this to JSON response using either Map Action or Gateway Script. The JSON response is as follows:
**"location": {
"structuredaddress": {
"flatOrUnit": {
"flatOrUnitType": "Apartment",
"flatOrUnitNumber": "666"
},
"floorOrLevel": {
"floorOrLevelType": "Apartment",
"floorOrLevelNumber": "1A"
},
"buildingOrPropertyName": [
{
"name": "Garden City"
},
{
"name": "Building Name 2"
}
],
"locationDescriptor": "East Block",
"lotNumber": "5",
"house": [
{
"house": {
"houseNumberPrefix": "ABC",
"houseNumber": 10,
"houseNumberSuffix": "A"
}
},
{
"house": {
"houseNumberPrefix": "ABC",
"houseNumber": 10,
"houseNumberSuffix": "A"
}
}
]
}**
While mapping to JSON fields, we will check for every AddressR. If the Label matches the field in JSON then put the corresponding Line value to it for ex:
if(Label =="Flat/Unit (Type)")
then in JSON response, flatOrUnitType = Line
I have gone through many links but none of them explain how to do iterate over arrayed SOAP response in Map Action.
Please help in this. Code would be appreciatedapiconnectjsonsoapmappingmaptransformationcomplex data typecomplexsamplesTue, 04 Dec 2018 17:51:44 GMTSushobhit KModel Estimate in Complex Samples General Linear Model
https://developer.ibm.com/answers/questions/454985/model-estimate-in-complex-samples-general-linear-m.html
I am running a Complex Samples General Linear Model. I want to report the F-value for the overall model. I assume I should be reporting the F-value for the Corrected Model, but just want to confirm this is the right statistic to use (vs. the F-value for the Independent Variable).modelcomplexsamplesFri, 22 Jun 2018 23:09:50 GMTdr.stnrFactor Analysis of Complex Samples????
https://developer.ibm.com/answers/questions/450942/factor-analysis-of-complex-samples.html
It looks like one can't perform a factor analysis in SPSS 25 and take into account that the sample is a multi-stage stratified cluster sample. I'm assuming that the only analyses available for complex samples are the ones in the complex sample analysis menu.
Am I right? It would be great if I weren't right.complexsamplesThu, 31 May 2018 22:00:39 GMTNKR1complex sample logistic CSLOGISTIC. database type used
https://developer.ibm.com/answers/questions/423746/complex-sample-logistic-cslogistic-database-type-u.html
Hi,
I have a big clustered database. patients clustered in hospital and I'm thinking of using complex samples logistic to adjust for clustering in my logistic regression models. my question is : is complex samples logistic CSLOGISTIC only used in survey data and survey analysis ? my database isn't a survey. I also was wondering if GEE (generalized estimating equation) is a better option. I appreciate any help. ThanksspssclusteredcomplexsamplesgeeThu, 11 Jan 2018 15:46:00 GMTManafonSPSS 22 Complex Samples Logistic Regression Error Message
https://developer.ibm.com/answers/questions/419779/spss-22-complex-samples-logistic-regression-error.html
Our complex samples plan uses "interviewer" as the cluster variable (there are 36 interviewers each doing multiple cases ( n=300). There is no stratification. In our complex samples logistic regression, we have received the error message: "The estimated parameter variance for the simple random sampling design is zero." Simple descriptive stats (which assume simple random sampling) show that the simple random sample variance is not zero. We would be grateful for any insight into what is causing this error message.spsscomplexsamplesMon, 18 Dec 2017 21:18:53 GMTDr PSPSS Complex Samples Add-On
https://developer.ibm.com/answers/questions/355698/spss-complex-samples-add-on-1.html
Hi! I'm located at a university that has a concurrent user license for SPSS 24. However, the version that we have access to does not have the complex samples add-on, which I need for analysis of a dataset that I received from the CDC. How can I obtain access to this add-on?complexsamplesFri, 10 Feb 2017 13:17:49 GMTRJMcCurdyWhen to use Factors and Covariates in a Complex Samples Logistic Regression?
https://developer.ibm.com/answers/questions/296962/when-to-use-factors-and-covariates-in-a-complex-sa.html
When I do the Complex Samples Logistic Regressions, what difference does it make if I put the independent variables as "Factors" or "Covariates"? In what situation should I use "Factors" and in what situation should I use "Covariates"?spsscomplexsamplesMon, 22 Aug 2016 09:09:43 GMTAnnaFrenzelWhen to use Factors and Covariates in Complex Samples Logistic Regressions?
https://developer.ibm.com/answers/questions/296564/when-to-use-factors-and-covariates-in-complex-samp.html
When I do the Complex Samples Logistic Regressions, what difference does it make if I put the independent variables as "Factors" or "Covariates"? In what situation should I use "Factors" and in what situation should I use "Covariates"?spsscomplexsamplesFri, 19 Aug 2016 10:00:22 GMTAnnaFrenzelError-message when performing a logistic regression analysis in the Complex Samples-module in SPSS
https://developer.ibm.com/answers/questions/293732/error-message-when-performing-a-logistic-regressio.html
I am trying to do a logistic regression analysis in the Complex Samples-module in SPSS. I have created a plan-file in the format csaplan. When I (in the syntax) type in where the plan-file is located, I recieve this message:
"The procedure cannot access a default joint probability file with specification: H:\SUB\SUB 2015\Analys körningar\Regressionsanalyser i Complex Samples\SUB2015_planfil.sav. The file specification is either syntactically invalid, specifies an invalid drive or directory, specifies a protected directory, specifies a protected file, or specifies a non-sharable file. Execution of this command stops."
It seems as if SPSS is searching for a sav-file instead of a csaplan-file? I have tried to create a new plan-file but I still recieve the same message. Does anyone know how to fix this?spsscomplexsamplesMon, 08 Aug 2016 13:30:19 GMTAnnaFrenzelHow to correct error regarding measure of size using Complex Samples?
https://developer.ibm.com/answers/questions/280729/how-to-correct-error-regarding-measure-of-size-usi.html
I am trying to draw a sample using Complex Samples, but continue to get an error warning that states:
**The maximum Measure of Size(MOS) value across population units cannot be greater than the total MOS in the population divided by the sample size.
Execution of this command stops.**
My sampling design is as follows, with the goal of sampling 1,500 units from a population of roughly 24,000:
**Stage 1:**
Stratified, Probability Proportional to Size (PPS) Systematic Sampling : select 19 clusters from 4 strata (Stratum A = 7 clusters; B = 6; C =4; D = 2).
**Stage 2:**
Simple random sample (SRS) proportional number of units from each of the 19 selected clusters.
Is anyone able to help with pulling this sample?
Thank you.spsscomplexsamplesTue, 14 Jun 2016 18:40:46 GMTTLentzhierarchical logistic regression
https://developer.ibm.com/answers/questions/257657/hierarchical-logistic-regression.html
Is it possible to do hierarchical logistic regression in SPSS complex samples?logisticregressioncomplexsamplesThu, 10 Mar 2016 19:22:53 GMTWilson36