How to solve => "6 Disks of 6 didn't provide SMART status" error?
Since we could not figure out a way to set the MegaRAID 5110e adapter in an x3650M4 to path-though mode, we had to configure the 6 1 TB disks each as RAID0. Now at the end of the deployment we find the following errors in the log:
2015-08-18 17:43:55,155 ERROR 2015-08-18 17:43:55: Error: module-2(172.16.254.2): 08-18 23:45:30 Disk_Bandwidth [ERROR ] 6 Disks of 6 didn't provide SMART status
2015-08-18 17:43:55,157 ERROR 2015-08-18 17:43:55: Error: module-3(172.16.254.3): 08-18 23:45:31 Disk_Bandwidth [ERROR ] 6 Disks of 6 didn't provide SMART status
2015-08-18 17:43:55,157 ERROR 2015-08-18 17:43:55: Error: module-1(172.16.254.1): 08-18 23:44:01 Disk_Bandwidth [ERROR ] 6 Disks of 6 didn't provide SMART status
Can someone tell us how to work around this error or how to configure the MegaRAID Controller to pass the disks along as simple JBODs?
Hi Mstandau,
From the technical specifications of the MegaRAID 5110e adapter JBOD is supported. To Configure disks in Jbod mode please reference the following documentation. Under section 4.12 Converting Unconfigured Good Drives to JBOD Drives Page 77.