Question & Answer
Question
SWSA Shadow tunnels for Sysplex distributed Targets are not being created. The following messages are seen in the IKE/TRMD debug logs on the Sysplex Distributor LPAR:
EZD0830I Tunnel distribution failed : 03/20/2019 14:50:48.17 vpnaction=xxxxxx tunnelID= Yx AHSPI= 0 ESPSPI= xxxxxxxxxx
EZD0831I Tunnel takeover preparation failed : 03/20/2019 14:50:48.17 vpnaction= xxxxxx tunnelID= Yx AHSPI= 0 ESPSPI= xxxxxxxxxx
Answer
both the , ezd0830i and ezd0831i messages indicate an EZBDVIPA Coupling facility structure issue ocurred trying to setup the SWSA shadow tunnel(s).
D NET,STATS,TYPE=CFS,STRNAME=EZBDVIPA,list=all
The EZBDVIPA structure display shows that there is only have 1 entry created and it is taking up 100% of the defined ezbdvipa structure size. This indicates that that the ezbdvipa CF structure size is too small
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = STATS,TYPE=CFS
IST1370I xxxxx.xxxxx IS CONNECTED TO STRUCTURE EZBDVIPA
IST1797I STRUCTURE TYPE = LIST
IST1517I LIST HEADERS = 2048 - LOCK HEADERS = 0
IST1373I STORAGE ELEMENT SIZE = 256
IST924I -------------------------------------------------------------
IST1374I CURRENT MAXIMUM PERCENT
IST1375I STRUCTURE SIZE 13312K 13312K NA
IST1376I STORAGE ELEMENTS 0 184 0
IST1377I LIST ENTRIES 1 1 100
IST924I -------------------------------------------------------------
IST1834I LIST DVIPA SYSNAME TCPNAME ENTRIES TGCOUNT SEQNUMBER
IST1835I 1 x.x.x.x
IST1836I LPAR1 TCPIP 0 0
IST314I END
IST1375I
This message shows the structure size.
curr_size is the current size, in kilobytes, of the structure. This
is the amount of storage currently allocated for the structure.
max_size is the maximum size, in kilobytes, of the structure. This
is the value coded for the SIZE parameter on the structure
definition in the CFRM policy.
percent ? ***NA*** is displayed for this value.
***NA*** is displayed if these statistics are temporarily
unavailable.
IST1377I
This message shows the number of list entries allocated for the
structure.
curr_entries is the current number of list entries allocated for the
structure.
max_entries is the maximum number of list entries that can be
allocated for the structure at its current size.
percent is the fraction of entries in use.
Please refer to the following link as a reference in calculating the size of the ezbvdipa cf structure:
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.istimp0/modlisthd.htm
Product Synonym
ZOSCS COMMSERVER
Was this topic helpful?
Document Information
Modified date:
29 March 2019
UID
dwa1499367